If you choose a faucet, if it is not properly maintained, it will affect its longevity. This is a major headache for many people. Faucets are used quite frequently. Basically, faucets are used every day in life. With such a high frequency of use, how do we maintain the faucet to make it last longer? It’s not really that difficult. As long as the installation, use and maintenance of the correct, the actual life of the faucet can be extended, and can always be bright as new.
- When the gas temperature is below zero degrees, if you find that the handle of the faucet is not normal, you must spray the bathroom products with hot water to a normal feel before using, otherwise it will affect the life of the faucet valve core.
- After the tap will appear dripping phenomenon, which is due to the drowning phenomenon exists in the inner cavity after the tap is closed. This is a normal phenomenon. If the phenomenon of dripping more than ten minutes, is the leakage of water, indicating that the product quality problems.
- Due to the small amount of carbonic acid in the water, it is easy to form scale on the metal surface to corrode the surface of the faucet, thus affecting the cleaning and service life of the faucet. Therefore, always wipe the surface of the faucet with a soft cotton cloth or sponge with neutral soap (note: do not use corrosive or acidic substances to wipe). Then wipe the surface dry with a soft cloth. Avoid using steel wool or wiping pads with hard particles. Also, do not hit the faucet surface with hard objects.
- Do not overuse on the faucet switch. Even traditional faucets do not require a lot of force to twist. In particular, do not support or use the handle as a handrail. Many people are accustomed to deliberately exerting some force to turn off the faucet after using it. This is undesirable. This will not only prevent leakage, but also cause damage to the sealing valve, resulting in weak faucets.
- The water flow is reduced to remove impurities. With a water pressure of at least 0.02mpa, if you notice a reduced water flow, the faucet may be clogged internally. The solution is to gently unscrew the nozzle strainer cover at the faucet spout with a wrench. Carefully clean the impurities and then carefully install.