search Site Search

How to Remove Kitchen Faucet without Basin Wrench

ClassificationFaucet Guide 14050 0

How To Remove Kitchen Faucet Without Basin Wrench

how to remove kitchen faucet without basin wrench

The basin wrench, also known as the sink wrench, is a plumbing tool designed to make the removal and installation of the faucet more efficient. However, not all homeowners have a basin wrench because the tool is not that easy to use. In this article, we will walk you through an effective way to remove the kitchen facuet without basin wrench.

Tools required

If you want to remove the faucet without a basin wrench, you will need the following items.

  • Socket wrench
  • Tape gauge
  • Screwdriver
  • Grease
  • A clean, soft cloth or towel
  • Channel-lock pliers

How to remove a faucet without a basin wrench

Step 1: Turn off the water flow

First turn off the water flow to the kitchen faucet. You can usually find valves under the faucet, and you should also provide separate valves for hot and cold water flows.

Close both valves and make sure they are tight. If you do not have valves, or if they are not working properly, you should also be able to shut off the water flow at the main on-off valve.

Step 2: Make sure the water is turned off

After the valve is closed, turn on the faucet to make sure that there is no water flow. Turn on the faucet and let it sit for a few minutes. This will release any accumulated air pressure and make the process of removing the pressure lock on the pipe easier.

Step 3: Put a container under the faucet

A large bowl or bucket should be placed under the valve to catch the remaining water in the pipeline. Disconnect the two pipes and be especially careful around the hot water supply.

It is recommended that you use water pump pliers to remove the water pipe, because temporary tools may damage the water pipe.

Step 4: Remove the faucet mounting nut

After removing all the water pipes, you need to remove the faucet. Determine whether it is fixed with nuts or screws.

If it is fixed with a nut, use a socket wrench to remove it. The screws should be removed with a screwdriver.

If it is difficult for you to loosen anything, a quick wiping of grease or spraying WD40 should help release everything.

When removing nuts or screws, make sure to store them in a safe place to avoid losing them.

Step 5: Clean up and evaluate everything

Please check this area before you take any other steps. Look for any rust or corrosion, and see if there is anything else that might hinder the cleaning of the faucet.

Step 6: Remove the faucet

When everything is removed, your faucet should be lifted cleanly from its mount. If it sticks again, use a little grease, let it soak for a few minutes, and then slowly push the faucet up, being careful not to apply too much pressure, which may damage it.

Bottom line

As long as you follow the steps above, it is not hard to remove kitchen faucet without basin wrench. But if you have a basin wrench, it will be much easier. Basin wrench is a strong and frequently -used tool. So, it is recommended to prepare a basin wrench in your home.


Previous:: Next:

您好!Please sign in

Click to cancel reply
    Welcome to the WOWOW FAUCET official website


    Select your currency
    USDUnited States (US) dollar
    EUR Euro



    Browsing History