search Site Search

The difference between the installation of ordinary faucets and hot and cold water taps

ClassificationFaucet Guide 17069

2168c79c269efd8e

22edb084af2389ee

 

How to install a general faucet

When installing a regular faucet, we first need to take out the fixed base of the faucet and unscrew the nut from the threaded pipe. The hose that connects the faucet to the water pipe will be equipped with a soft after attaching the hose to the stainless steel faucet fittings, such as the threaded pipe and the silicone pad. The hose goes through the object that needs to be installed, such as the sink, basin, etc.

At this point, it is important to note that the silicone pads that are worn on the hose are installed on both sides of the sink, basin, etc. Tighten them at the end to ensure greater stability of the base faucet. Then screw the small end of the hose into the inlet of the faucet until it stops. No other tools need to be used. Afterward, screw the nut tube into the lower side of the faucet. The silicone pad on the upper side of the sink, basin, etc. can then be removed and placed underneath the faucet. Finally, fix the faucet with the nut, screw on the nut, and the faucet is fixed.

 

Hot and cold faucet installation method

When installing a hot and cold water faucet, the first thing you need to do is to put all the accessories in place and make sure the instructions are correct. Let’s take the installation method of hot and cold water faucet as an example and introduce the specific installation steps. The first step is to connect the two inlet pipes of the cold water pipe and the hot water pipe with the corresponding inlet of the cold and hot water faucet horse.

After the connection is completed, the fixed column of the hot and cold water faucet is put into the two inlet pipes to ensure the corresponding cold and hot correctly. After these operations are completed, you need to install the assembled hot and cold water faucet on the sink, wash basin and other objects, and place an inlet pipe in the opening of the wash basin and so on. Finally, fix the horseshoe piece of the faucet and tighten the screw nuts.

The above is the specific installation method of ordinary faucets and hot and cold water faucets. According to the function of the faucet and the different installation orientation, its installation method is also different. After reading the above introduction, do you have a better understanding of the installation of faucets?

7c0e230ca6cd036e

Previous:: Next:
展开更多
Welcome to the WOWOW FAUCET official website

loading...

Select your currency
USDUnited States (US) dollar
EUR Euro

Cart

X

Browsing History

X