Updated October 21, 2026 · WOWOW
Replacing a faucet while keeping the existing sink can refresh a kitchen without changing the whole work area. The key is to check the sink’s mounting layout and condition before choosing the replacement. This WOWOW checklist helps you establish what can stay and what needs attention.
Confirm the sink is suitable to keep
Inspect the area around the faucet base for damage, movement and signs of water entering below the deck. Check the sink’s mounting and the cabinet underneath. If the deck is cracked, distorted or badly corroded, a new faucet alone will not resolve that underlying problem.
Distinguish surface marks from installation damage. If you cannot tell whether the mounting area is sound, ask an installer to assess it before purchasing a replacement. Avoid treating a larger cover plate as a repair for damaged material.
Count all mounting holes
Look above and below the sink to identify the existing holes, including any hidden by a plate. Record their diameter and spacing where accessible. Note which are used by the faucet, side sprayer, soap dispenser or another accessory.
Compare that layout with the new model’s requirements. A single-hole faucet may be compatible with a suitable plate over a multi-hole layout, but plate coverage, hole spacing and the mounting surface still need to be checked. Do not assume all three-hole arrangements are identical.
Measure the space the new faucet will use
Record deck thickness, spout reach, available height and handle clearance. Check nearby window hardware and the backsplash. If the new faucet has a retractable head, inspect the cabinet for the hose’s movement path and the position of its weight.
Keep both above-counter and below-counter measurements with the model’s dimension drawing. A faucet that fits the hole may still conflict with a window or lack enough room for the hose.
Check removal access and supply connections
Look for access to the existing mounting nuts and the shutoff valves. A deep sink or disposal can make removal difficult. Corroded fasteners and valves that will not close reliably should be assessed before the water supply is disturbed.
Confirm the new faucet’s connection specifications against the existing valves. Use compatible components and follow the installation instructions for seals and tightening. Do not assume every joint needs thread tape or that an adapter shown for another model is appropriate.
Verify the finished installation before restocking
- Check the faucet is seated and secured as instructed.
- Confirm full handle and spout movement.
- Follow the specified flushing and startup procedure.
- Check supply and hose connections for leaks.
- Observe retractable-hose movement with the cabinet open.
Keep the cabinet accessible while carrying out the manual’s checks. If moisture appears, identify its source rather than assuming it is leftover cleaning water. Stop using the installation and address any active leak.
Compare WOWOW kitchen faucets against your existing sink measurements, and use the matching installation instructions. For an uncertain fit, send the model number and photographs to WOWOW before starting removal.
WOWOW Faucets