Bathroom Wall Tile Only Half, Interesting And Save Money!
Bathroom walls can be paved only half in addition to full tiles. This is an interesting and more cost-effective wall decoration.
If you want to try this paste method, you have to pay attention to.
- Tiling in dry and wet areas is not the same. In the dry area, the general height of the tile is about 1.3 meters. In the shower area, the general height of at least 2 meters. You can also spell out different shapes, like the homeowners in Figure 14 and 15.
- Generally this type of tiling will be tiled at the edge as a separation from the wall, but not every tile has a matching hemmed tile. Pay attention when choosing bricks.
- Common wall treatment with diatomaceous earth and bathroom paint. Bathroom paint + half wall tile is cheaper compared to laying full tile. Diatomaceous earth is about the same as the cost of laying full tiles.
- If there is no window in the bathroom, it is difficult to disperse the moisture, so it is not recommended to use this method of paste.
In the dry area, paste half of the tile.
The cement countertop is matched with marbled half-face tiles, so that three levels of the countertop, brick and wall are very good-looking. If the entire wall is tiled, it may not have this effect. This uneven shape of the mosaic tile produces no edge effect, so it is very nice.
Paste the I-beam tiles on half of the wall and paint a waterproof coating on it. This is really a great choice to save money and high value.
Half painted and half tiled looks much better than all tiled. You do not need to worry about waterproofing. Waterproof latex paint is very reliable.
The height of 1.2 meters of tile was applied below. The wall is made of a material similar to diatomaceous earth.
The white space is not overly constricted.
The tiles around the bathtub
If only half of the area is paved with tiles, half of the effort is saved when cleaning up the joints.
If you are worried that dark tiles are too depressing, only half of the pavement is also a good choice.
Waterproof bathroom paint is also available in a variety of colors.
You can give the shower area “special care”.
For the shower area, it is recommended to pave more than two meters of wall tiles, or pave the entire wall tiles in the shower part.
Use patterned tiles in the lower part of the bathroom. The upper part is treated with quartz wall cloth + waterproof paint. The overall sense of hierarchy is very adequate.
In the shower area, a separate tile with the same height as the glass partition is laid.
Or just pave the shower area with wall tiles. The dry area still retains half wall tiles.
In order to separate wet and dry, use the same set of color tiles.
More interesting half-wall and half-tile combinations.
You can also spell out irregular sides.
Only paste the shower area part, commonly known as the shower area backdrop. This hexagonal tiles really save money and look good.