What Does A 4 Inch Centerset Faucet Mean
Bathroom faucets come in many varieties – different styles, designs and configurations. You can find numbers of options that fit tight spaces or larger areas. For tight bathroom spaces, a 4-inch centerset faucet is one of the great options. So, what is a 4 inch centerset faucet? What’s the difference between a four-inch and eight-inch centerset faucet? We’re here to answer these questions, so keep reading to learn more!
What does a 4 inch centerset faucet mean
Centerset faucets are the most common choice for bathroom faucets. These faucets fit four-inch wide three-hole pre-drilled sinks. The outer holes allow for the connection of each faucet, while the holes in the middle provide room for mixing connections.
All components of the 4″ centerset faucet are on or inside a single piece – components are inside the spout and handle, which are on a single deck. Other types of faucets, such as widely available faucets, often have separate parts, but the center faucet is a single piece.
The single piece makes installation very simple. Since everything is on one plate, you don’t need to worry about aligning each part perfectly with the other. Also, you shouldn’t have issues with the handle being in an unstable position when closed.
Many times, installation is as simple as inserting the faucet into the three holes in the sink deck, then securing the faucet to the sink with nuts. Then, connect the water pipes and connect them to the water supply. Attach the drain assembly, attach it to the P-trap, and check your handwork. Often it’s that simple!
While these faucets are convenient, you may not find fancy or sophisticated designs. Since the four-inch configuration limits variability, there isn’t much change from one faucet to the next. Although the handle design may be different and the spout may be a high or low arc, they usually all look the same.
How to Measure A Centerset Faucet
You’ll need to measure the faucet. You can measure above the tap or below the faucet; it’s up to you. Faucets usually come in standard sizes, like 4-inch centerset, so there shouldn’t be any guesswork.
Using a measuring tape or ruler, measure the distance between the center point of the far left hole to the center point of the far right hole. Finding the center points is easier when you’re under the sink. If you want to make it even easier on yourself, take the old faucet out of the sink, then measure the holes from above the sink.
Make sure you don’t measure from the outsides of each hole – try to measure from as close to the center point as you can. If you measure from the outside of each hole, you’ll probably end up with a measurement closer to five inches.
Frequently Asked Questions (FAQs)
What is the difference between a single hole faucet and a centerset faucet?
Both Centerset and single hole faucets are popular choices for compact bathrooms. If you’re working in an extremely limited space, single hole faucets are often a better choice, as these tend to have a smaller footprint.
The main difference between the two types of faucets is the number of holes required for installation. While this is exactly what a single-hole faucet needs, a center-mounted faucet requires three holes to install.
Can I use a single hole faucet instead of a center faucet?
Yes, you can replace the central faucet with a single hole faucet. You’ll need a deck plate to cover the extra holes, but it works. You can also replace the single hole faucet with a center faucet, but you will need extra work, drilling extra holes and making sure there is room under the sink for the plumbing.
What’s the difference between a four-inch and eight-inch center faucet?
The only difference between a 4″ and 8″ center faucet is the distance between the holes. Instead of mounting in holes four inches apart, an eight-inch center faucet fits in holes eight inches apart.