How To Change Water Pressure In Bathroom Or Kitchen Sink
Water pressure is a major aspect of many household tasks. When the water pressure is too low, bathing may not be as pleasant, and washing dishes or rinsing your hands may take more time to scrub. When water pressure is too high, it can cause various problems, such as pinhole leaks in pipes and shortened lifespan of water heaters, washing machines and dishwashers. Therefore, finding the perfect balance is crucial. So how to change water pressure in bathroom or kitchen sink? We are here to fix this problem and please read on this post.
Why is the water pressure in my sink so low
Low water pressure is a common problem, probably more so than high water pressure problems. A clogged bubbler or filter element is the most common culprit for low water pressure in a sink. An aerator is a small screen at the end of a nozzle that melts air into the water as it exits the fixture. The cartridge is inside the faucet itself, so accessing it is a bit complicated. You will need to clean the aerator to remove mineral deposits or clean/replace the filter element.
Why is the water pressure in my sink so high
The water pressure in the sink may be too high. If the water pressure is too high, the water pressure in the entire home may be too high. To fix this, you may need a water pressure regulator.
Alternatively, if the water pressure is too high for your sink, you can lower the water pressure by turning the shutoff valve under the sink. Turn the valve a quarter turn clockwise to reduce pressure.
If you notice high water pressure in your home, it’s a good idea to check the PSI and make sure it’s not too high, as this can cause all kinds of problems. Simply connect the meter to any male tap in your home, turn on the water and check the reading. The ideal reading is usually between 40 and 60 PSI. If the measurement exceeds 80 PSI, the pressure needs to be reduced.
How to increase water pressure in your bathroom or kitchen sink
Method 1: Fully open the valve
Find the shut-off valve that supplies water to the bathroom sink faucet. Both are usually located under the sink or on the wall inside the vanity. Turn the handle on the valve counterclockwise to the fully open position of the faucet in question. Test the water pressure of faucet; if that doesn’t fix the problem, go to the next method.
Method 2: Clean the aerator
Soak all aerator parts in white vinegar for 30 minutes to dissolve hard water deposits. Scrub the components with a stiff bristle brush and rinse. Reassemble the unit, screw it back into the spout and test the faucet; if the pressure is still low, go to the next method.
Method 3: Replace the globe valve
Take two ball globe valves of the same size from the nearest pipe outlet. Use an adjustable wrench to connect the compression fitting on the water supply line to the valve, replacing the two valves that supply water to the sink. Reconnect the hose to the faucet, open the household water shutoff valve and test the faucet.
Final thought on how to change water pressure
A faucet with a low water pressure will not run continuously, and a faucet with a high water pressure will waste water and energy. Fortunately, there are some easy ways to adjust the water pressure for each faucet. If you want to increase the pressure, you can try cleaning the aerator, flushing the filter, or flushing the water supply line. You can also fine-tune the shutoff valve to increase and decrease pressure. When you have the same problem with your faucet, after reading this article, your faucet should be running like new!
您好！Please sign in