WOWOW FaucetsQuick Answer
The right kitchen faucet fits your sink or countertop, reaches into the bowl, and leaves enough room for the handle and spray hose. Start with mounting measurements, then choose the spray design and finish. Check the selected model's package contents, flow rate, and documented certifications before purchasing.
Key facts / Spec sheet
- Product types
- Pull-down, pull-out, bridge, bar-sink, and wall-mounted pot-filler faucets.
- Mounting
- Match deck or wall mounting, hole count, hole spacing, and maximum deck thickness to the selected model.
- Clearance
- Check spout height, reach, handle travel, backsplash clearance, and room for the hose below the sink.
- Finishes and materials
- Finish names and body materials vary by model; use the individual product specification.
- Included parts
- Confirm whether the deck plate, supply lines, side sprayer, and mounting hardware are included.
- Certification and flow
- Verify the selected model's documented certification and flow rate; a category listing does not certify every model.
Compare kitchen faucet types
| Type | What it does | Fit check |
|---|---|---|
| Pull-down | A spray head that pulls down from the spout | Check full spout height and the hose path beneath the sink. |
| Pull-out | A spray head that pulls outward | Check reach, pull-out clearance, and the hose connection. |
| Bridge with side sprayer | A separate sprayer and a traditional exposed bridge design | Match all required holes and their center-to-center spacing. |
| Bar or prep sink | A secondary sink or compact work area | Compare the actual dimensions with the smaller basin. |
| Pot filler | Filling cookware at the stove | Plan the wall connection, arm reach, mounting height, and shutoff access. |
1. Record the existing mounting layout
Count the sink or countertop openings and note how each is used. A soap dispenser, side sprayer, filtered-water tap, or dishwasher air gap can occupy an opening beside the main faucet. Measure center-to-center spacing and the thickness of the mounting surface. Compare these measurements with the exact product drawing; the number of handles alone does not tell you how many holes are needed.
2. Check reach and clearance above the sink
Measure the space from the mounting position to the bowl, the clearance below any window or cabinet, and the room behind the faucet for the handle. A high spout is useful only when it fits the space. Check that the water stream will land comfortably inside the bowl rather than close to its edge, and account for the full range of the spout and handle.
3. Check the space beneath the sink
Look for a clear path for a pull-down or pull-out hose and its weight. Supply pipes, shutoff valves, a disposal, storage baskets, and drawers can interfere with movement. Confirm that the mounting hardware is accessible and that the supply connections match the faucet. Do not assume existing hoses or adapters should be reused; follow the replacement model's instructions.
4. Choose useful functions before the finish
Compare the spray modes, handle arrangement, swivel range, and cleaning access that matter in your kitchen. A separate side sprayer requires a different layout from an integrated spray head. Sensor-operated models may have power and control requirements beyond those of a manual faucet. Finish names can also vary across brands, so compare the actual finish offered for the selected model.
5. Compare product documentation
Check the body material, valve or cartridge specification, flow rate, included parts, and care instructions for each model. If a product claims a certification, look for documentation identifying that model; a category description or a material name does not establish certification. Confirm the applicable warranty and replacement-parts process using the product's current documentation.
6. Plan installation and a leak check
Read the installation manual before removing the old faucet. Confirm that the shutoff valves work and that the required tools, hoses, adapters, and mounting parts are available. Follow the manufacturer's tightening and sealing instructions, then check the supply connections and faucet for leaks. Wall-mounted or in-wall work, damaged plumbing, and uncertain connections are reasons to involve a qualified installer.
Buying for the US, Canada, or Mexico
Check the product and checkout information for the destination, available delivery, currency, and return terms. Water-use requirements, plumbing connections, and accepted certifications can differ by location. Use the exact model's documentation and local installation requirements rather than assuming one country's specification applies everywhere.
Frequently Asked Questions
What measurements do I need before buying a kitchen faucet?
Record mounting hole count and spacing, deck thickness, spout height and reach, handle clearance, and available space beneath the sink. Compare them with the selected faucet's drawing.
Can I cover unused sink holes when replacing a faucet?
A compatible deck plate, hole cover, or suitable accessory can cover an unused opening. Check dimensions, sealing requirements, and whether the parts are included.
Is a pull-down faucet better than a pull-out faucet?
The better fit depends on the sink and available space. Compare spout height, working reach, spray-head movement, and the unobstructed hose path under the sink.
Can I use the same faucet when replacing my kitchen sink?
Only if the new sink or countertop supports its mounting requirements and the faucet still has suitable reach and clearance. Check both installation drawings before keeping the existing faucet.
How do I verify a faucet's certification?
Look for model-specific documentation or a certifier's listing that identifies the product. Do not treat the finish, body material, or a general brand statement as proof for every model.
