In the morning, when you leave the bathroom with a lazy footstep and blur the light reflected from the radiant shell of the faucet, you unscrew the slippery handle of the faucet, the water wakes up and wakes you up, the faucet closes a new day in your life. Let me tell you how to install the basin faucet!
◎Installation of single hole basin faucet
When purchasing a single-handle basin faucet, you should pay attention to the diameter of the water outlet. Most of the market is now a hard pipe, so you should pay attention to the height of the water inlet. The 35 working points from the basin are most suitable. When installing, be sure to choose a special angle valve, and the angle valve must be fixed with the hot and cold water pipe of the wall outlet. When you find a distance between the angle valve and the water pipe on the faucet, purchase a special extension tube to connect. Remember, don’t use other water pipes to connect, because if the water pressure is too large, it will easily fall off and leak, causing damage to you. If the inlet pipe is too long to exceed the outlet pipe, you can cut off the part according to your needs. If the angle is not suitable, bend it to the position you need as needed. Remember: Do not bend hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, please don’t forget to buy the small interface of the faucet (the faucet is shorted). Don’t forget to flush the water pipes buried in the wall before you install it.
◎Installation of thermostat
Before installing the thermostatic faucet, please check if the water pipe is left hot and cold right. Remember not to connect the hot and cold water pipes incorrectly, so as to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Please install the thermostatic faucet and don’t forget to install the hot and cold water filter.
◎Installation of single hole kitchen faucet
The requirement is stable, because the kitchen faucet is used frequently, and it is moved and moved, so it is easy to loosen, so the lock nut must be tightened. At present, some faucets appear on the market for the screw to increase the nut fixing. This kind of stability effect is very good. If it can solve the problem of water removal, it will be a popular trend in the future.